Model 1000 X-Y Recorder

NOTICE: The Model 1000 has been permanently upgraded to the Model 1144. Specifications for the 1000 can be found below for current users. To view details for the 1144, click here.

The Plotamatic® 1000 X-Y Recorders are a family of analog servo drive-instruments which use 11 x 17 inch and DIN A-3 charts. Very versatile X-Y recorders can be made up by selecting multi-sensitivity input modules while dedicated (OEM) units can be specified by using modules with fewer features and sensitivity(ies) to match the signals which are to be recorded. Select multirange modules for inch/centimeter calibration switch feature. Vacuum or Electrostatic Chart Hold is available. Pens are disposable fiber tip.

INPUT MODULE 1

This module plugged into the X axis of the recorder provides the greatest recording versatility by providing a built in time base. When coupled with Module 2, both axes have full sensitivity capability. 1000 Series modules are interchangeable between X and Y axes.

1000 Series Modules

Signal Input 

Sensitivities

 Time Base Ranges

Module 1 1, 2, 5, 10, 20, 50, 100, 200, 500, 1000, 2000 mV/inch and VARIABLE GAIN
0.5, 1, 2.5, 5, 10, 25, 50, 100, 250, 500, 1000 mV/cm and VARIABLE GAIN
0.5, 1, 2, 5, 10, 20, 50, 100, 200, 500, 1000 sec/in
0.25, 0.5, 1, 2.5, 5, 10, 25, 50, 100, 250, 500 sec/cm
Module 2 1, 2, 5, 10, 20, 50, 100, 200, 500, 1000, 2000 mV/inch and VARIABLE GAIN
0.5, 1, 2.5, 5, 10, 25, 50, 100, 250, 500, 1000 mV/cm and VARIABLE GAIN
none
Module 2B Adds a panel trim control for optional bridge power supply to Module 2 none
Module 3 1, 2, 5, 10, 20, 50, 100, 200, 500, 1000, 2000 mV/inch
0.5, 1, 2.5, 5, 10, 25, 50, 100, 250, 500, 1000 mV/cm; Servo STANDBY
0.5, 1, 2, 5, 10, 20, 50, 100, 200, 500, 1000 sec/in
0.25, 0.5, 1, 2.5, 5, 10, 25, 50, 100, 250, 500 sec/cm
Module 4 1 FIXED: from 1 mV/inch to 10 V/inch or 0.5 mV/cm to 5 v/cm;
Servo STANDBY
none
Module 5 1 FIXED: from 1 mV/inch to 10 V/inch or 0.5 mV/cm to 5 v/cm none
Module 6 0.5, 1, 2 V/ inch none
Module 7 Half Scale/Full Scale none
Module 10 none 3, 6, 12, 15, 24, 30, 60, 120, 300, 600 minutes/full scale
Module H1 1 FIXED: from 1 mV/inch to 10 V/inch or 0.5 mV/cm to 5 v/cm; with in/cm switch none
Module H2 Variable from 1 mV/inch to 2 V/inch (0.5 mV/cm to 1 V/cm) none
Module H3 1, 10, 100mv; 1, 10 V/inch and 0.5, 5, 50, 500 mV; 5 V/cm and VARIABLE GAIN none
Module H4 1, 10, 100mv; 1, 10 V/inch and 0.5, 5, 50, 500 mV; 5 V/cm and VARIABLE GAIN  0.5, 1, 2, 5, 10, 20, 50, 100, 200, 500, 1000 sec/in
0.25, 0.5, 1, 2.5, 5, 10, 25, 50, 100, 250, 500 sec/cm

Click here to view 1000 Series Modules as a PDF.

Specifications

Type of Inputs:   Floating. Rear input connectors and front input terminals are standard on all multi-range models. Front connectors may be omitted on quantity orders
Impedance:   1 megohm at DC all models, all ranges, calibrated or uncalibrated
Accuracy:   ± 0.2% full scale
Dead Band:   ± 0.1% full scale
Linearity:   ± 0.1% full scale
Zeroing:   Full scale ± 120% zero suppression all models
Slewing Speed:   41 in/sec (104 cm/sec) nominal
Zero Check:   Most modules
Pen Lift:   Electric, with remote control capability TTL or switch closure
Standardization:   Double-regulated zener reference with temperature stability better than 0.003%/C°
Temperature:   Less than ± 0.2% full scale, 10° to 40° C after warm up, including zero shift
Maximum:   200 V peak to peak
Common Mode:   >120 dB @ DC; >120 dB @ 60 Hz; >120 dB @ 400 Hz on most sensitive range, with 1K ohm source unbalance
Pens :   Disposable, fiber tipped
Paper Holding:   Vacuum or Electrostatic
Writing Area:   10 x 15 inch (25 x 38 cm)
Paper Size:   11 x 17 inch (28 x 42 cm or DIN Size A-3)
Power:   115 V or 230 V, ±10% switchable, 50-400 Hz, approximately 40 watts peak
Accessory:   Dust Cover, carry case
Physical:   Weight: Approximately 27 lb. (12.2 kg) | Shipping Weight: Approximately 36 lb. (16.2 kg)

Need financing?
Click here to view this document as a PDF.

To learn more about Allen Datagraph, please contact us.