Model 1100 X-Y Recorder

The Plotamatic® 1100 Series XY Recorders are a family of high performance analog servo drive instruments. All models offer high sensitivity, are available with high acceleration and either inch or centimeter calibration. A wide range of chart sizes are accommodated including ISO A3, ISO A4, ANSI B and ANSI A. The 1100 Series can be configured to be a form, fit and function replacement of Hewlett Packard’s 7044and 7045 recorders. OEM and HP 7040®/7041® configurations may also be specified.

HP INTERFACE OPTION

Allen Datagraph 1100 Series Recorders have the same dimensions as the Hewlett Packard 7044/7045 recorders, so they can fit into existing rack openings. The HP interface option provides our recorder with the plug and function compatibility of the Hewlett Packard Models 7044/7045, (7040 and 7041configuration is jumper selectable.) This option allows the user to directly replace their HP system recorder without having to change cables, function commands, or rack opening. The 1100 Series HP Interface Option supports all 7044, 7045, 7040 and 7041 functions.

BRIDGE POWER SUPPLY OPTION

This option simplifies the recording of transducer signals by providing an adjustable excitation voltage of +5 to +15 VDC. 50 mA (350 Ohms) which can be tapped from the rear signal input connector or from a terminal strip on models with the HP Interface Option. The power supply is current limited at 80 milliamperes to prevent damage to sensitive transducers. This option may be specified for one or two channels.

ADDITIONAL FEATURES

  • Ultra stable IC circuitry requires no additional servo compensation or loop gain adjustments.
  • Servo feedback is provided by sealed follow-up potentiometers which do not require cleaning.
  • Electronic overdrive circuitry protects recorder from off-scale inputs.

1100 Series Model Selection

Model Acceleration Sensitivities Time Base Ranges Calibrated Offset
Sensitivity Offset
1144E Standard, 5G (2000 in/sec/sec) 0.05, 0.1, 0.2, 0.5, 1, 2, 5, 10, 20 mV
and V/inch
plus VARIABLE GAIN
 0.5, 1, 2, 5, 10, 20, 50, 100, 200, 500, 1000 sec/in 0.5, 0.1, 0.2, 0.5mV
1, 2, 5, 10, 20mV
0.5, 0.1, 0.2, 0.5V
1, 2, 5, 10, 20V
0 to ±100mV
0 to ±1000mV
0 to ±100V
0 to ±1000V*
1144M Standard, 5G (5080 cm/sec/sec) 0.025, 0.1, 0.25, 0.5, 1, 2.5, 5, 10,
mV/cm and V/cm
plus VARIABLE GAIN
0.25, 0.5, 1, 2.5, 5, 10, 25, 50, 100, 250, 500 sec/cm 0.025, 0.05, 0.01, 0.25mV
0.5, 1, 2.5, 5, 10mV
0.025, 0.05, 0.01, 0.25mV
0.5, 1, 2.5, 5, 10mV
0 to ±100mV
0 to ±1000mV
0 to ±100V
0 to ±1000V*
1145E High, 10G (4000 in/sec/sec) 0.05, 0.1, 0.2, 0.5, 1, 2, 5, 10, 20 mV
and V/inch
plus VARIABLE GAIN
 0.5, 1, 2, 5, 10, 20, 50, 100, 200, 500, 1000 sec/in 0.5, 0.1, 0.2, 0.5mV
1, 2, 5, 10, 20mV
0.5, 0.1, 0.2, 0.5V
1, 2, 5, 10, 20V
0 to ±100mV
0 to ±1000mV
0 to ±100V
0 to ±1000V*
1145M High, 10G (10160 cm/sec/sec)  0.025, 0.1, 0.25, 0.5, 1, 2.5, 5, 10,
mV/cm and V/cm
plus VARIABLE GAIN
 0.25, 0.5, 1, 2.5, 5, 10, 25, 50, 100, 250, 500 sec/cm 0.025, 0.05, 0.01, 0.25mV
0.5, 1, 2.5, 5, 10mV
0.025, 0.05, 0.01, 0.25mV 0.5,
1, 2.5, 5, 10mV
0 to ±100mV
0 to ±1000mV
0 to ±100V
0 to ±1000V*

Click here to view 1100 Series Selection as a PDF.

Specifications

Type of Inputs:   Floating, 1 megohm all ranges
Calibrated Offset:   ± 500 VDC maximum with counting dial
Accuracy:   ± 0.2% full scale
Differential:   200 VDC maximum
Zero Adjustment:   ±120% full scale
Slewing Speed:   1144E: 41 in/s (104 cm/
1144E: 50 in/s (127 cm/s)
Zero Check:   X and Y push buttons
Pen Lift:   40 Hz maximum
Common Mode:   >120 dB @ DC; >120 dB @ 60Hz; >120 dB @ 400 Hz on most sensitive range, with 1K ohm source unbalance
Pens :   Fiber tip, disposable
Recording Area:   10 x 15 and 7 x 10 inch (25 x 38 and 18 x 25 cm)
Chart Size:   11 x 17 and 8.5 x 11 inch (Din A3, A4)
Power:   117 or 230 VAC, +10% switchable, 50 to 400 Hz
Chart Hold:   Electrostatic
Instability:   0.02% of reading/°C
Physical:   32 to 122°F (0 to 50°C)

Need financing?
Click here to view Specifications as a PDF.

To learn more about Allen Datagraph, please contact us.