Model 700 XY Recorders

The Plotamatic 700 Series XY Recorders are a family of servo drive instruments which use 8.5″ x 11″ and DIN A-4 charts. Models range from dedicated, analog only, to multi-range general purpose recording systems having both analog and digital inputs. Rugged aluminum extrusions and die castings surround a laminated steel and plastic writing table. The 700 Series offers the PAD/LOAD? or Electrostatic Chart Hold System. Pens are disposable fiber tip. See price list for available options.

An optional digital interface enables analog users to annotate charts, draw grids, do extended time YT recording, and do other plotting functions. Both inch and centimeter scaling are available. Parallel and Serial interfaces are provided. The system accepts commands and ASCII characters from a personal computer (pc) or from the optional keyboard. Contact Allen Datagraph for further information.

Model 700 Series Model Selection

 Model 

Sensitivities

 Time Base Ranges

710E 1 FIXED: from 1 mV/inch to 10 V/inch available none
710M 1 FIXED: from 0.5 mV/cm to 5 V/cm available none
715E 1, 10, 100 mV/inch; 1, 10 V/inch plus VARIABLE GAIN none
715M 0.5, 5, 50, 500 mV/cm; 5 V/cm plus VARIABLE GAIN none
720E 1, 2, 5, 10, 20, 50, 100, 200, 500 mV/inch; 1, 2 V/inch plus VARIABLE GAIN none
720M 0.5, 1, 2.5, 5, 10, 25, 50, 100, 250, 500 mV/cm; 1 V/cm plus VARIABLE GAIN none
725E  1, 2, 5, 10, 20, 50, 100, 200, 500 mV/inch; 1, 2 V/inch plus VARIABLE GAIN  0.5, 1, 2, 5, 10, 20, 50, 100 sec/in
725M   0.5, 1, 2.5, 5, 10, 25, 50, 100, 250, 500 mV/cm; 1 V/cm plus VARIABLE GAIN  0.25, 0.5, 1, 2.5, 5, 10, 25, 50 sec/cm
735E  0.5, 1, 5, 10, 50, 100, 500 mV/inch; 1, 5 , 10 V/inch plus VARIABLE GAIN  none
735M  0.25, 0.5, 2.5, 5, 25 , 50, 250, 500 mV/cm; 2.5, 5 V/cm plus VARIABLE GAIN  none

Click here to view 700 Series Model Selection as a PDF.

To learn more about Allen Datagraph, contact us.

Specifications

Type of Inputs:   Floating and guarded. Rear input connectors and front input terminals are standard on all models
Impedance:   1 megohm at DC all models, all ranges, calibrated or uncalibrated
Accuracy:   ± 0.2% full scale
Dead Band:   ± 0.1% full scale
Linearity:   ± 0.1% full scale
Zeroing:   Full scale plus 120% suppression all models
Slewing Speed:   23 in/sec (58 cm/sec) nominal
Zero Check:   Model 715, 720, 725, 735
Pen Lift:   Electric, with remote control capability TTL or switch closure
Standardization:   Double-regulated zener reference with temperature stability better than 0.003%/C°
Temperature:   Less than ± 0.2% full scale, 10° to 40° C after warm up, including zero shift
Maximum:   200 VDC peak to peak
Common Mode:   >120 dB @ DC; >120 dB @ 60 Hz; >120 dB @ 400 Hz on most sensitive range, with 1K ohm source unbalance
Pens :   Disposable, fiber tipped, 6 colors
Paper Holding:   PAD/LOAD® or Electrostatic Chart Hold (Optional)
Paper Loading:   A switch or command indexes the carriage to the extreme right edge of the recording area to facilitate chart loading and removal
Writing Area:   7 x 10 inch (18 x 25 cm)
Paper Size:   8.5 x 11 inch (22 x 28 cm or DIN Size A-4)
Power:   115 V or 230 V, ± 10% switchable, 50-400 Hz, approximately 40 watts peak
Options:   Electrostatic Chart Hold, locking knobs for variable gain adjustment and zero adjustment controls. Rack mounting, Digital Interface
Accessory:   Dust Cover, carry case
Physical:   Weight: Approximately 20 lb. (9.07 kg) | Shipping Weight: Approximately 25 lb. (11.34 kg) | Fits EIA standard 19 x 10½ inch opening, using optional brackets
 Type of Inputs:   Analog: P/N 57-40140 Amphenol | Digital (Option 30): RS-232C: P/N 206584-1 AMP | Digital (Option 30): 8 Bit Parallel: P/N 840-576-4036027 Amphenol

Need financing?
Click here to view specifications as a PDF.

To learn more about Allen Datagraph, contact us.